ASTM E2864-18(2022) Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption

ASTM E2864-18(2022) Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surf ...

ASTM WK17123 New Test Method for Test Method for Carbon Monoxide Chemisorption on Supported Platinum on Alumina Catalysts using Dynamic Flow Method

ASTM WK17123 New Test Method for Test Method for Carbon Monoxide Chemisorption on Supported Platin ...

ASTM WK71859 New Test Method for Carbon Monoxide Chemisorption on Supported Platinum on Alumina Catalysts using Static Vacuum Method

ASTM WK71859 New Test Method for Carbon Monoxide Chemisorption on Supported Platinum on Alumina Ca ...

ASTM—D2856- 用空氣密度儀測定硬質泡沫塑料開孔泡室百分含量的標準方法

ASTM—D2856- 用空氣密度儀測定硬質泡沫塑料開孔泡室百分含量的標準方法

ASTM D6226-2005 硬質微孔塑料開胞腔含量的試驗方法

ASTM D6226-2005 硬質微孔塑料開胞腔含量的試驗方法

ASTM_D_1622-2008-ASTM D1622-2008硬質泡沫塑料表面密度測試方法

ASTM_D_1622-2008-ASTM D1622-2008硬質泡沫塑料表面密度測試方法

ASTM D6556-10 Standard Test Method for Carbon Black Total and External Surface Area by Nitrogen Adsorption – Committee D24 on Carbon Black

ASTM D6556-10 通過氮吸附測定炭黑總比表面和外比表面的標準測試方法 - 炭黑委員會D24

ASTM D5604-96(2012) Standard Test Method for Precipitated Silica – Surface Area by Single Point B.E.T. Nitrogen Adsorption – Committee D11 on Rubber

ASTM D5604-96（2012）沉淀二氧化硅的標準測試方法 - 單點B.E.T.氮吸附比表面 - 橡膠委員會D11

ASTM D4780 - 12(2017)e1 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorptio

ASTM D4780 - 12(2017)用多點氪吸附法測定催化劑和催化劑載體低表面積的標準試驗方法

ASTM D4641-12 Standard Practice for Calculation of Pore Size Distributions of Catalysts and Catalysts Carriers from Nitrogen Desorption Isotherms – Co

ASTM D4641-12 計算氮氣解吸等溫線催化劑和催化劑載體孔徑分布的標準實施規(guī)程 - 催化劑委員會D32

ASTM D4567-03(2008) Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Ads

ASTM D4567-03（2008）采用連續(xù)流動方法進行氮吸附單點法測定催化劑和催化劑載體的比表面的標準測試方法 - 催化劑委員D32

ASTM D4365-95(2008) Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst – Committee D32 on Catalysts

ASTM D4365-95（2008）測定催化劑微孔體積和沸石比表面的標準測試方法 - 催化劑委員會D32

ASTM D4222-03(2008) Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Stati

ASTM D4222-03（2008）采用靜態(tài)容量法測定催化劑和催化劑載體的氮吸附和解吸等溫線的標準測試方法 - 催化劑委員會D32

ASTM D3663-03(2008) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers – Committee D32 on Catalysts

ASTM D3663-03（2008）催化劑和催化劑載體的比表面的標準測試方法 - 催化劑委員會D32

ASTM D1993-03(2008) Standard Test Method for Precipitated Silica – Surface Area by Multipoint BET Nitrogen – Committee D11 on Rubber

ASTM D1993-03（2008）沉淀二氧化硅的標準測試方法 - 多點BET氮吸附比表面 - 橡膠委員會D11

ASTM C1274-10 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption – Committee C28 on Advanced Ceramics

ASTM C1274-10 采用物理吸附法測定先進陶瓷比表面的標準測試方法 - 先進陶瓷委員會C28

ASTM C1069-09 Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption – Committee C21 on Ceramic Whitewares and Rel

ASTM C1069-09 采用氮吸附法測定氧化鋁或石英比表面的標準測試方法 - 陶瓷白色器皿及相關產品委員會C21

ASTM B922-10 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption – Committee B09 on Metal Powder and Metal Powder Produ

ASTM B922-10 采用物理吸附法測定金屬粉末比表面的標準測試方法 - 金屬粉末和金屬粉末產品委員會B09